A Simple Toaster Oven Mold
Making a very simple toaster oven mold of a flat pendent.
Making a Toaster Oven Mold Using New Rectangular Mold Holder
I show how to make a toaster oven using rectangle mold frames.
Making a Toaster Oven Rubber Mold with Molding Rubber
A toaster oven mold made with green mold rubber.
Making a Toaster Oven Mold of a Weiner Dog Ring
Using a sling casting rubber I show how to setup the mold that vulcanizes in a toaster over.
Part 1- An Experiment to Make a Half Sided Mold
An idea that worked out great. By using a plate that sits inside the mold frame I make a half mold.
Showing how the Rectangular Mold Frame will Fit in my Mold Making Kit
No Description
Opening the Mold of the Sideways Bunny Ring Part-2
The powder separation mold of the sideways bunny was a success!
Making a Powder Separation Mold of a Sideways Bunny Ring part-1
Using a semi hard mold Rubber, I show how to mold this sideways bunny ring.
How I Cut the Toaster Oven Mold Rubber
Using my Arbor press and die I made from copper pipe I show how I cut out Mold rubber for the toaster oven system.
Part 1- Making a Toaster Oven Rubber Mold of a Large Heart Pendent
Using the mold holder I made a toaster oven mold for casting pewter and wax injection.
Part 2- Taking Apart the Toaster Oven Mold of the Large Heart Pendent
Wax can be injected or gravity poured using pewter.
A Simple Way to Cut a Round Toaster Oven Rubber Mold
Using my toaster oven mold kit I mad a simple round mold of a ring and show an easy way to cut it.
Showing How a Toaster Oven Mold of a Ring Works with Wax Injection and Pouring Pewter
Another toaster oven mold wax injection or gravity cast with pewter.
Using the Toaster Oven Rubber Mold
I show how to cast pewter into the toaster oven mold.
Removing the Rubber Mold Vulcanized in the Toaster Oven
Showing how easy it is to make a quality mold using a toaster oven.
Molding Tool that Works in a Toaster Oven
A simple tool for making rubber molds in a toaster oven.
Part 1- Making a Toaster Oven Rubber Mold
Having fabricated a copper pendent I now want to mold it so that I can cast it in copper without having to fabricate each one.
Video 1- Making a Toaster Oven Rubber Mold
Using a silicone mold rubber,I show how to vulcanized rubber mold of a pendent. Toaster oven temp is 350* F and cook time is 50 mins.
How to Determine Mold Rubber Thickness
Generally mold rubber should be 1/4 taller than the mold frame.
Some Basics About Wax Injection
This is just a quick video on wax injecting in hopes of helping the beginner understand simple wax injection and isn't intended to educate the professional. As a substitute of Talc some use corn starch. PSI is usually around a 7 unless the mold is fairly large or really thin requiring more pressure to inject This is done by increasing the pressure by 2 pounds at a time.
Mold Making- Powder Separation Step One
In this video I show how to set up a powder separation mold using silicone mold rubber in a basic toaster oven. Temp is 350* F and for 50mins.
Mold Making- Powder Separation Step Two
How to remove the mold from the mold holder.
Mold Making- Powder Separation Step Three
I show how to use a ball bur to cut the spurs in the mold. while the more proper way is to solder spurs onto the items before making a mold, not everyone is comfortable with this so this method can work out great.
Mold Making- Powder Separation Experiment
Using the mold rubber I am making a vulcanized rubber mold of a bronze wide band ring.
Mold Making- Powder Separation Experiment Results
In this video I open up the results of my experiment.